10KM 100G CFP2 Optical Transceiver Module 100G-CFP2-LR4-10km compatible with Cisco Huawei
The CFP2 LR4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.
Product Features
Duplex LC receptacle optical interface
Single +3.3V power supply
Hot-pluggable
Operating optical data rate up to 112Gbps
Operating electrical serial data rate up to 27.952493Gbps
4 parallel electrical serial interface
AC coupling of CML signals
PIN ROSA
Low power dissipation(Max:9W)
Built in digital diagnostic function
Operating case temperature range:0℃ to 70℃
Compliant with 100GBASE-LR4 and OTU4
MDIO Communication Interface
Compatible with all kinds of commercial ONT
Standards:
Compliant with IEEE 802.3ba
Compliant with CFP2 MSA hardware specifications
Compliant with CFP2 MSA management specifications
Compliant with ITU-T G709/Y.1331
Compliant with RoHS
Specification
| Product Name | 100G CFP2 10km DDM 100GBASE-LR4 optical transceiver cfp module |
| Date Rate | 100G |
| Wavelength(nm) | 1310 |
| Source | EML+PIN |
| Temperature Range | 0℃~+70℃ |
| Connector | 2xLC |
| TX Power(dBm) | -2.5~+3 |
| RX Sens(dBm) | -10.6 |
| DDM | With |
| Reach | 10km |
Absolute Maximum Ratings
| Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Notes |
| Storage Temperature |
Tst |
-40 |
+85 |
ºC |
||
| Supply Voltage |
Vcc |
-0.5 |
+3.6 |
V |
||
| Operating Relative Humidity |
Rh |
+5 |
+95 |
% |
Recommended Operating Conditions
| Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Notes |
| Operating Case Temperature |
TC |
0 |
- |
+70 |
°C |
|
| Power Supply Voltage |
VCC |
3.14 |
3.3 |
3.46 |
V |
|
| Data rate |
103.125 |
112 |
Gb/s |
Applications
Local Area Network(LAN)
Wide Area Network(WAN)
Switch to router interface
ITU-T OTU4 OTL4.4 applications
